ITFIND - 분석 보고서
주메뉴바로가기 본문바로가기

분석 보고서

Home > 보고서 > 분석보고서
facebook 공유하기 twitter 공유하기
제목
용접 불량 검사를 위한 음향공진 검사 장치 개발
출처
한국센서학회
발행일
2019-12-31
분야분류
IT소재부품, 해외동향, IT부품정보, IT부품정보 네트워크,
원문정보
원문 바로가기
We have developed an acoustic resonance inspection system to inspect the welding defects in the mechanical parts fabricated using friction stir welding method. The inspection system was consisted of a DAQ board, a microphone sensor, an impact hammer, and controlled by a PC software. The system was developed to collect and analyze the sound signal generated by hitting the sample with an impact hammer to determine whether it is defective. In this study, 100% welded good samples were compared with 95%, 90%, and 85% welded samples, respectively. The variation of the completeness in welding did not affect the visual appearance in the samples. As a result of analyzing the natural frequencies of the good samples, the five natural frequency peaks were identified. In the case of the defective samples, the frequency change was observed. The welding failure detection time was fast enough to be only 0.7 seconds. Employing our welding defect inspection system to the actual industrial field will maximize the efficiency of quality inspection and thus improve the productivity.